Home / Frequently asked questions

Frequently asked questions

Straight answers about robot footwear.

Fit, durability, grip, testing, lead times and support in the U.S. If your question is not here, ask us.

About TERLY and RobotSole

What is TERLY?

TERLY is the official U.S. distributor of RobotSole. It sells and supports two lines of robot footwear: the bionic shoe for humanoid robots and ZL-PAD foot pads for robot dogs. TERLY is a brand of Southern Gale Textiles, based in Florida.

Who distributes RobotSole in the United States?

TERLY is the official U.S. distributor of RobotSole. It handles quotes, prototypes, orders, import and customs, and repeat orders. You work with a U.S. company in your own time zone, not directly with the factory.

What is RobotSole?

RobotSole is the robot footwear brand of Shenzhen Zhilv Technology. It combines 30 years of sneaker manufacturing with more than 3 years developing footwear with leading robot brands in Asia. It holds more than 30 sole patents and co-develops its compounds with Dawn Polymer (002838.SZ).

What industrial backing does RobotSole have?

RobotSole produces in more than 70,000 m² of partner production bases in northern China and Guangdong. Its sole factory makes around 12 million pairs a year and is certified ISO 9001, ISO 14001 and ISO 45001.

What does TERLY add as RobotSole’s U.S. partner?

TERLY is RobotSole’s official partner in the United States: the same product and factory pricing, with a U.S. team that runs the project with you. That includes application engineering with your engineers, import and customs, delivered pairs with duties included, and support during your pilot, in your time zone.

Humanoid bionic shoe

What is the RobotSole bionic shoe?

It is a shoe for humanoid robots built in four layers: a 70A rubber outsole, a 40A TPV midsole, a 7075 aluminum plate and a thermoformed PU upper. Every layer is designed with one priority: keeping the robot safely on its feet.

Which humanoid robots does it fit?

Humanoid robots from 25 to 100 kg. The fit is matched to each robot’s foot geometry and, when needed, custom molds are made from its 3D data in 15 to 25 working days.

What are its layers and what does each one do?

The ~70A rubber outsole grips, with a zoned anti-slip tread and a bumper edge: the first line of safety on wet and polished floors. The ~40A TPV midsole absorbs at least 60% of the impact. The 7075 aluminum plate (≤8 mm) carries the load, with built-in metal washers for fastening. The thermoformed PU upper is waterproof and dustproof, in your colors. Together, they are designed to keep the robot safely on its feet.

How long does a humanoid robot sole last?

RobotSole soles are designed for more than 8,000 hours of use, against 2,000–3,000 hours for standard rubber soles. In the Akron test, abrasion is 0.20 cm³ or less, against 0.25 cm³ for the international baseline.

Why is safety the first requirement for robot footwear?

For a person, comfort comes first; for a robot, safety does. A pair of shoes is a small cost, but a fall can damage the whole robot. That is why RobotSole designs every shoe to stay firmly fastened, not split, not come off, not wear out fast and not slip.

Why isn’t a rubber pad glued to the plate enough?

Because the glue is the weak point: pads peel off, pass impact and vibration to the joints, slip on wet floors and wear fast. RobotSole joins sole and plate by injection molding, with no adhesive, and uses metal washers that resist pull-out.

Can it be made in my brand’s colors, with my logo?

Yes. The upper is thermoformed PU and is produced in your brand palette, with your logo. Custom colors and logos are made with your own tooling, in 15 to 25 working days.

Robot dog pads

What are ZL-PAD foot pads?

They are two-layer foot pads for quadruped robots. A ZL-PAD-40A layer (Shore A 40 ± 5) cushions the impact, and a ZL-PAD-70A layer (Shore A 70 ± 5) is the contact skin that grips and resists wear. They are molded around the robot’s aluminum foot structure.

What is the best material for robot dog feet?

A system with two dedicated layers, because each common material fails somewhere. Nitrile rubber turns brittle and loses grip in the cold. Silicone wears out fast. Polyurethane is weak against water and UV. Natural rubber ages in sun and oil.

How fast do the pads wear?

In the Akron test (GB/T 1689), the ZL-PAD-70A layer loses 0.03 cm³ per 1.61 km. A TPU sample loses 0.05 cm³, rubber 60# 0.12 cm³ and rubber 50# 0.29 cm³. These are results from RobotSole’s own lab testing.

Do they grip on wet floors?

Yes. The wet-slip index of ZL-PAD-70A is 0.536 (tan δ at 0 °C, DMA), about twice a TPU sample (0.258) and almost four times natural rubber 70 (0.137). Higher is better.

What temperatures do they work in?

Both compounds work from −45 °C to 140 °C, which covers outdoor patrols in cold, heat and wet ground.

Technology and testing

How does RobotSole compare with the industry baseline?

All eight measured properties of the bionic shoe beat the international baseline for robot soles: shock absorption ≥60% (baseline ≥50%), dry friction μ ≥0.6 (≥0.5), anti-slip angle ≥35° (≥30°), Akron abrasion ≤0.20 cm³ (≤0.25), compression set ≤18% (≤20%), tensile strength ≥15 MPa (≥13), tear strength ≥40 kN/m (≥35) and hardness 63–78 Shore A (60–75).

Why isn’t a softer sole better for a robot?

Because an overly soft material compresses flat on impact and passes the energy straight to the joints. RobotSole uses gradient stiffness, like the human foot and radial tires: a hard contact layer, a soft cushion layer and a rigid base.

How is wet grip measured?

With dynamic mechanical analysis (DMA), the same method used to rate tire treads on wet roads. It runs at 10 Hz, in tension at 0.3% strain, sweeping −40 to 80 °C at 3 °C/min, per ISO 4664-2 and ASTM D5992. The indicator is tan δ at 0 °C.

How is it manufactured and quality-checked?

In five phases: joint design on the robot’s 3D data with a three-party sample sign-off; Teflon-coated steel molds and trial molding; dual-density vulcanization with material, friction and abrasion tests and a factory lab report; integrated injection of the upper around sole and plate, with no adhesive; and logo printing with a final check of appearance, dimensions and adhesion.

Buying, lead times and support

How do I start if I don’t have specs yet?

With a conversation. TERLY works out the foot geometry, robot weight, floors and use case with your team, and proposes the sole and compound from there. You don’t need a finished spec sheet.

How long does it take to get footwear for my robot?

A prototype on your robot takes about 5 working days. Custom tooling, for a perfect fit and colors at scale, takes 15–25 working days. Production takes about 7 working days, up to 1,000 pairs per run. Import and customs into the U.S. add 1 to 3 weeks, handled by TERLY.

How much does it cost?

It depends on the robot, the quantity and whether custom tooling is needed. The price is the same as buying direct from the factory. TERLY replies within one business day with a proposal for your case, with delivered pairs and duties included.

What is the minimum order?

There is no fixed minimum to get started: the first step is a prototype on your robot. Production volume is set in the proposal, depending on the model and whether it needs custom tooling.

Can we reorder or get spare pairs in the United States?

Yes, on demand. At this stage each shoe is made to fit each robot, so repeat orders and spare pairs are produced at the factory and TERLY handles the import (1 to 3 weeks).

Do you support us during the pilot?

Yes. During your pilot TERLY follows wear, fit and performance on your floors and proposes adjustments if needed before moving to production.

Put your robot on better footing.

Tell us about your robot. We reply within one business day and work out the right footwear with you, from specs to production, in the U.S.