Home / Humanoid robots

Humanoid Bionic Shoe

The shoe that keeps your humanoid safely on its feet.

A unique technology built in layers: a 70A rubber outsole, a 40A TPV midsole, an aluminum plate and a sculpted upper in your colors. For humanoid robots of 25 to 100 kg.

Humanoid robot legs in graphite knit RobotSole shoes
Humanoid robot walking in graphite knit RobotSole shoes
Graphite knit bionic shoe, side view
Pair of graphite knit bionic shoes, three-quarter view
Pair of graphite knit bionic shoes, top view
Graphite knit bionic shoe, heel detail
Humanoid robot walking in white RobotSole shoes
White bionic shoe for humanoid robots
←→1 / 9

Safety first

A fall costs more than the shoe.

≥60%shock absorption
≥35°anti-slip angle
≤8 mm7075 aluminum plate
1 interfaceacross robot generations

Explore the shoe.

Turn the shoe and tap a point to see what each part does.

RobotSole bionic shoe, side view
RobotSole bionic shoe, three-quarter view
RobotSole bionic shoe, heel view
  1. 1

    Rubber outsole, ~70A

    Zoned anti-slip tread and a bumper edge: the first line of safety on every step.

  2. 2

    TPV midsole, ~40A

    Gradient cushioning that absorbs impact and silences each step.

  3. 3

    7075 aluminum plate, ≤8 mm

    Carries the load. Built-in metal washers keep the shoe securely fastened, so it never comes loose.

  4. 4

    Thermoformed PU upper

    Waterproof and dustproof. Your colors and logo.

  5. 5

    Toe and heel spring

    10–15° at the toe and 8–12° at the heel for a natural roll-through.

  6. 6

    Bumper rubber

    A protective edge for kicks, curbs and stair noses.

What breaks today, fixed at the source.

Most humanoids walk on an aluminum plate with a glued rubber pad. Here is what that costs you, and what changes.

Pads peel and loosen

Locked in, no glue

A composite wrap and an integrated plate with metal washers that resist pull-out.

Impact, vibration and noise

Quiet, cushioned steps

A TPV gradient midsole that absorbs at least 60% of the shock, protecting joints and floors.

Stuck on steps and slopes

Moves like a foot

A bionic profile with 10–15° toe spring and 8–12° heel spring for stairs, ramps and rough ground.

Slips and wears fast

Grip that lasts

Zoned tread with a wear-resistant 70A rubber outsole, matched to your floors.

A fall damages the whole robot

Built to keep it upright

A pair of shoes is a small cost; a fall can damage the whole robot. Every layer is designed to keep it upright.

A new part for every model

One standard interface

A standard foot plate that fits across generations: fewer molds, SKUs and stock.

Above the industry baseline, on every line.

RobotSole targets compared with the international baseline for robot soles.

PropertyRobotSoleBaseline
Shock absorption≥60%≥50%+10 pts
Dry friction (μ)≥0.6≥0.5+20%
Anti-slip angle≥35°≥30°+5°
Akron abrasion (lower is better)≤0.20 cm³≤0.25 cm³20% less wear
Compression set, 70 °C × 24 h≤18%≤20%Keeps its shape
Tensile strength≥15 MPa≥13 MPa+15%
Tear strength≥40 kN/m≥35 kN/m+14%
Hardness63–78 Shore A60–75 Shore A

Performance figures are RobotSole targets and lab measurements from its own testing. Full test reports available on request.

Details you feel on every step.

Small engineering choices that add up to a robot that walks with confidence.

Toe and heel spring

10–15° at the toe and 8–12° at the heel for a natural roll-through.

Zoned tread

Different patterns where the foot pushes, turns and lands.

Bumper rubber

A protective edge for kicks, curbs and stair noses.

Aluminum base

A rigid plate that carries the load and keeps the shoe securely fastened.

Built-in metal washer

Higher pull-out strength and a fastening that stays tight.

Ready for sensors

Next generations add slots for sensors and hidden wiring: the sensing foot.

From first conversation to production.

Real lead times, with U.S. support at every step.

  1. 01

    Let’s define it together

    Day 0

    No specs yet? We work them out with you: foot geometry, robot weight, floors and use case. From the first conversation, we are your footwear partner.

  2. 02

    Prototype on your robot

    ~5 working days

    A first fitted pair to test on your robot and on your floors, with our support in the U.S.

  3. 03

    Your own tooling

    15–25 working days

    Custom molds for your foot and your colorway, when you need a perfect fit at scale.

  4. 04

    Production

    ~7 working days

    Up to 1,000 pairs per run, with import and customs handled by us. Repeat orders on demand.

Fashion

Who said a robot shouldn’t dress well?

Beautiful shoes, in your colors and with your logo. The thermoformed upper matches your brand palette, so your robot walks in looking its best.

Put your robot on better footing.

Tell us about your robot. We reply within one business day and work out the right footwear with you, from specs to production, in the U.S.